Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
S-4088 Latch Kit fits hooks.
A-339 Clevis Sling Hook
Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
Pin locking requires no special tools.
S-4088 Latch fits 3/4″ & 7/8″ hooks.
A-329 Eye Foundry Hook
Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
A-328 Eye Grab Hook
Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
The use of A-328 Eye Grab Hook will result in a 20 percent reduction in chain capacity. When used to hook back to chain leg to form a choker, the angle of the choke must be 120 degrees or greater. When used as a chain shortener, minimize twist of the chain, and ensure the chain is fully engaged in hook.
A-338 Clevis Grab Hook
Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
Pin locking requires no special tools.
The use of A-338 Clevis Grab Hook will result in a 20 percent reduction in chain capacity. When used to hook back to a chain leg to form a choker, the angle of the choke must be 120 degrees or greater. When used as a chain shortener, minimize twist of chain, and ensure the chain is fully engaged in hook.
S-314A Clevis Chain Hook with Integrated Latch
Hook is Forged Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
Integrated heavy duty latch.
Large throat opening.
Anti-fouling due to carefully designed contours.
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80 chain fittings.
Fatigue rated.
“Look for the color Gold – Crosby Alloy Hooks.”
S-315A Eye Chain Hook with Integrated Latch
Hook is Forged Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
Crosby recommends grinding the WLL (which is 5:1 Design Factor) off the hook when using with Grade 80 chain.
Integrated heavy duty latch.
Large throat opening.
Anti-fouling due to carefully designed contours.
“Engineered Flat” for use with S-1325A Coupler Link.
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80 chain fittings.
